郑州局集团公司洛阳机务段三西救援实训基地职场环境整治优化招标公告
\n（招标编号LJ2022-20-01）
\n\n1．招标条件
\n本招标项目三西救援实训基地职场环境整治优化, 该项目已具备招标条件，现对三西救援实训基地职场环境整治优化项目采购进行公开招标。
\n\n
2．项目概况与招标范围
\n| \n 序号 \n | \n\n 物资名称 \n | \n\n 数量 \n | \n\n 规格 \n | \n\n 备注 \n | \n
| \n 1 \n | \n\n 道路方向指示牌 \n | \n\n 2个 \n | \n\n 900mmX1200mm \n | \n\n \n | \n
| \n 2 \n | \n\n 入口指示牌 \n | \n\n 1个 \n | \n\n 700mmX2000mm \n | \n\n \n | \n
| \n 3 \n | \n\n 综合培训室门牌 \n | \n\n 1个 \n | \n\n 350mmX500mm \n | \n\n \n | \n
| \n 4 \n | \n\n 综合培训室墙面造型1 \n | \n\n 1套 \n | \n\n \n | \n\n \n | \n
| \n 5 \n | \n\n 综合培训室墙面造型2 \n | \n\n 1套 \n | \n\n \n | \n\n \n | \n
| \n 6 \n | \n\n 综合培训室外墙面立体字1 \n | \n\n 1套 \n | \n\n \n | \n\n \n | \n
| \n 7 \n | \n\n 体能室展牌1 \n | \n\n 4块 \n | \n\n 900mmX1200mm \n | \n\n \n | \n
| \n 8 \n | \n\n 体能室展牌2 \n | \n\n 2块 \n | \n\n 900mmX1200mm \n | \n\n \n | \n
| \n 9 \n | \n\n 小体能室造型1 \n | \n\n 1套 \n | \n\n \n | \n\n \n | \n
| \n 10 \n | \n\n 小体能室展牌2 \n | \n\n 2块 \n | \n\n 900mmX1200mm \n | \n\n \n | \n
| \n 11 \n | \n\n 小体能室展牌3 \n | \n\n 1块 \n | \n\n 900mmX1200mm \n | \n\n \n | \n
| \n 12 \n | \n\n 宣传版面 \n | \n\n 6块 \n | \n\n 1500mmX3000mm \n | \n\n \n | \n
| \n 13 \n | \n\n 综合培训室入口门牌 \n | \n\n 1块 \n | \n\n 300mmX500mm \n | \n\n \n | \n
| \n 14 \n | \n\n 学员宿舍走廊画框 \n | \n\n 30块 \n | \n\n 550mmX800mm \n | \n\n \n | \n
| \n 15 \n | \n\n 演练场标识牌 \n | \n\n 4块 \n | \n\n 500mmX1200mm \n | \n\n \n | \n
| \n 16 \n | \n\n 演练场立式标牌 \n | \n\n 1组 \n | \n\n 2000mmX8000mm \n | \n\n \n | \n
| \n 17 \n | \n\n 工具标识牌 \n | \n\n 20块 \n | \n\n 150mmX400mm \n | \n\n \n | \n
| \n 18 \n | \n\n 宣传栏 \n | \n\n 2组 \n | \n\n 2700mmX5500mm \n | \n\n \n | \n
| \n 19 \n | \n\n 演练场人员休息遮阳棚 \n | \n\n 42平方米 \n | \n\n 3000mm*7000mm \n | \n\n \n | \n
| \n 质量要求 \n | \n\n *1.所用材质：道路方向指示牌、门牌等采用1mm铝板；入口指示牌采用镀锌板焊接造型，喷塑；墙面设计、走廊画框等采用高密度雪弗板或木纹画框写真画面十字膜；宣传版面采用专用铝型材；演练场标识牌采用雪弗板UV印刷，不锈钢焊接框架，地埋安装；演练场立式标牌采用镀锌板焊接造型；工具标识牌采用8mmPVCUV印刷；宣传栏采用镀锌板焊接造型. \n*2.设计制作产品需符合郑州局集团公司机务部职场环境整治工作相关条款 \n3.标牌的周边应平直，不应有明显的毛刺和齿形及波形。正面应平整光洁，边框线应匀称、平直，不应弯曲断缺。 \n*4.文字、符号、图片的大小和线条粗细应整齐醒目，排列匀称，不应断缺和模糊不清。表面不应有裂纹和明显的擦伤丝纹以及有影响其清晰的锈迹、斑点、暗影。 \n*5.涂镀层不应有气孔、气泡、雾状、污迹、皱纹、剥落迹象和明显的颗粒杂质。 \n6.粘贴标牌不应出现折痕、皱纹、自卷、撕裂和粘接剂渗出等现象。 \n*7.标牌的颜色应清晰醒目、色泽均匀，不应有泛色。 \n8.两种及两种以上颜色套印的标牌，色彩间边缘应整齐、清晰，两色相接处不应有间隙。 \n | \n|||
| \n 交货期/交货地点 \n | \n\n 交货期：自合同签订之日起15个工作日内 \n交货地 \n | \n|||
| \n 2.专用资格部分 \n | \n\n 无 \n | \n